Servo
| SKU | MPI4008 |
|---|---|
| Screen Size | 4.0inch |
| LCD Type | TFT |
| Module Interface | HDMI |
| Resolution | 800*480 (Pixel) |
| Backlight brightness | 290 (cd/m²) |
| Active Area | 51.84x86.40 (mm) |
| Touch Screen Controller | XPT2046 |
| LCD Driver IC | NT35510 |
| Backlight | LED |
| power consumption | 0.16A*5V |
| Working temperature (°C) | -30~80 |
| Module PCB Size | 98.60*58.05 (mm) |
| Package Size | 143*134*51 (mm) |
| Rough Weight(Package containing) (g) | 126 (g) |
- ① 3.5mm Headphone Jack: Output audio signal
- ② HDMI: Used to connect the main board and LCD display for HDMI transmission
- ③ Micro USB: Get 5V Power from USB, If ⑤-13*2 Pin Socket has been connected, that this USB interface can be No Connect.
- ④ Backlight adjustment button: Short press backlight change 10%, long press a few seconds to close backlight; short press to open backlight
- ⑤ 13*2 Pin Socket: Get +5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to Raspberry Pi.
How to use
How to use Raspbian/Ubuntu Mate/Kali/Retropie system
▶ Method 1
- Use the image of the driver preinstalled
1) Download the driver image file from the website: Image_Download 2) Format Micro SD card by SDFormatter 3) Burn the official image into Micro SD card by using Win32DiskImager. 4) Insert Micro SD card, connect LCD, start Raspberry Pi, and it will work normally.
How to use
How to use Raspbian/Ubuntu Mate/Kali/Retropie system
▶ Method 1
- Use the image of the driver preinstalled
1) Download the driver image file from the website: Image_Download 2) Format Micro SD card by SDFormatter 3) Burn the official image into Micro SD card by using Win32DiskImager. 4) Insert Micro SD card, connect LCD, start Raspberry Pi, and it will work normally.
▶ Method 2
Step 1, install the latest official images of various systems (Q:Don't know how to install?)
(1) Download from the official website
① 3.5mm Headphone Jack: Output audio signal.
② 3 HDMI: Use to connect the main board and LCD display (HDMI transmission).
③
- a. USB: Used to connect the power and USB.
- b. Micro USB (5V 2A Power Input): Pressing this button for 10 seconds, this USB interface can be for No connect.
④ Backlight adjustment button from 0% to 100%: Press 10 seconds to close backlight; press once to open backlight.
⑤ 192×192 Pixel Screen: Get 5V power from Raspberry Pi to LCD, at the same time transfer touch signal back to Raspberry Pi.
Download Resources
Documents
- MPI4008-4inch-HDMI-Display-C-User-Manual-V1.0.pdf
- MPI4008-4inch-HDMI-Display-C-Size.pdf
- How_to_install_the_LCD_driver_V1.2
- How_to_install_matchbox-keyboard
- How_to_calibrate_the_resistance_touch_screen-V1.2
- How_to_use_Raspberry_Pi(Download,Format,Burn,SSH, PuTTy)-V1.0.pdf
- How_to_change_display_direction-GPIO-Resistive_Touch-V1.2
- RaspberryPi Ubuntu-mate open ssh instructions
- RaspberryPi Ubuntu-mate-18.04 ssh connection failure solution description
- RaspberryPi Zero open serial instructions
- RaspberryPi Retropie using instructions
| HDMI Display | ||||||
|---|---|---|---|---|---|---|
|
| HDMI Display | |||||||||
|---|---|---|---|---|---|---|---|---|---|
|
